Installation and Configuration of Parallels Desktop

无法激活 Parallels Desktop:许可证服务器未接受 Parallels Desktop 早期版本的产品密钥

invalid@example.com (yu_5) — Wed, 31 Jul 2024 03:13:25 +0000

我在2016年购买了Parallels Desktop 12.
因为我的上一台MAC在2018年丢失，更换新的电脑之后我从未安装Parallels Desktop 12.
今天我尝试在新的电脑上安装Parallels Desktop 12.
我在邮箱里找到了当时购买的注册码，我输入之后，提醒我这是一个升级注册码，需要我填写老的码.我在邮箱中找到了一串老的码（邮箱里告诉我说，有时候注册可能需要这个老的码）。
当我填写了两个注册码，仍然提示我：
无法激活 Parallels Desktop:许可证服务器未接受 Parallels Desktop 早期版本的产品密钥

现在我需要解决这个问题，究竟是哪一个注册码错误？我该如何注册？

I purchased Parallels Desktop 12 in 2016.
Because my last MAC was lost in 2018, I never installed Parallels Desktop 12 after replacing it with a new mac.
But today I tried...

无法激活 Parallels Desktop:许可证服务器未接受 Parallels Desktop 早期版本的产品密钥

Routing problems with bridge101 aka host-only in Monterey

invalid@example.com (BallO) — Sun, 28 Jul 2024 06:14:59 +0000

I've been trying to get a simple route working in Parallel Desktop for days with zero success. I had a similar setup working in Mohave using an older version.
Setup: I have a linux router running on the host-only virtual network at 10.37.129.3. The host OS, Monterey, is at 10.37.129.2. I just want to route traffic through the linux router. The routing table looks fine:

Code:

> netstat -nrf inet
Routing tables
Internet:
Destination        Gateway            Flags           Netif Expire...

Routing problems with bridge101 aka host-only in Monterey

Parallels 11 activation on OS X 10.13.6 fails (Check your Internet connection)

invalid@example.com (MichaelP88) — Thu, 25 Jul 2024 07:39:57 +0000

Dear all,
there are already at least 2 similar threads with the same topic but without any solution so far.
I just completely reinstalled my iMac mid2011 from scratch (after reformatting the drives).
I used the latest OSX supported for that model which is 10.13.6 High Sierra (where Parallels 11 was running fine before I formatted the drives).
During the Parallels 11 installation process I was asked to enter my account data for activation.
It failed with the following error message: "Check...

Parallels 11 activation on OS X 10.13.6 fails (Check your Internet connection)

I'm trying to install Android on MacbookAir m1 and Parallels 17

invalid@example.com (dans29) — Sat, 20 Jul 2024 15:15:02 +0000

I get can't detect operating system when I manually select the ISO. Any idea how to get android to work?
Thanks.
Dan

MacBook

invalid@example.com (OP_2) — Wed, 17 Jul 2024 19:52:13 +0000

مرحبًا،
لدي سؤال بسيط: هل جهاز MacBook مزود بذاكرة 8 جيجابايت ومحرك أقراص ثابت سعة 256 جيجابايت كافٍ لتشغيل Windows 11 على جهاز Mac باستخدام Parallels؟

ACTIVATION KEY

invalid@example.com (EmmanuelI1) — Wed, 17 Jul 2024 14:52:08 +0000

PLEASE who has activation key for Parallels Desktop 15 for Mac

IBM SPSS datafile icon .sav

invalid@example.com (MichaelA35) — Sun, 14 Jul 2024 18:38:27 +0000

Dear parallels user,

I came to a dead-end with the standard support in a question regarding a wrong icon in Mac OS environment. I use IBM SPSS statistical software. This program has own icons for data-files. From the time of installation of parallels the standard icon changed to something that is a "Parallels VM state image". The standard extension of the IBM SPSS data-files is .sav. I looked up the extension for Parallels VM state image. It is .vmsav. I tried to rebuild the launchservice,...

IBM SPSS datafile icon .sav

Thermida: Sorry this application cannot run under a Virtual Machine

invalid@example.com (JonS1) — Sat, 13 Jul 2024 16:12:10 +0000

Hi guys,

So I'm running the trial version of parallels to see if I'll buy it - basically I'm receiving this error message:
"Thermida: Sorry this application cannot run under a Virtual Machine"

I'm trying to run a game - Legend of Mir 3, and wondered if there was anything I can do?

Yours in hope,

Jon

Printer Driver Installation Issue,error 0x800f0214

invalid@example.com (12341) — Fri, 12 Jul 2024 23:45:22 +0000

Hello!
I have an issue with my Windows system which is installed on an M1 Macbook, meaning it has Windows ARM. The problem is related to the fact that I am unable to install the driver for my new printer, and therefore unable to use it. For context, the printer is a Xerox Workcenter 3025, which requires its own xerox driver to work. However, whenever I try to install the driver, it gives me an error saying: "Operation could not be completed: error 0x800f0214." I believe that this...

Printer Driver Installation Issue,error 0x800f0214

Migrate Parallel Desktop 12

invalid@example.com (EricZ8) — Fri, 05 Jul 2024 23:35:35 +0000

I have two macOS systems installed on my iMac. I would like to migrate Parallel Desktop 12 from one system to the other. How should I proceed? I tried to sign out of Parallel Desktop on the original macOS system, but it prompted a network connection failure, even though I have confirmed that the network connection is normal.

Connector to my sql From Power BI

invalid@example.com (HarjitS) — Tue, 02 Jul 2024 10:30:25 +0000

Power BI from parallels is not able to connect My SQL (OnMac)
Can't install connector on my Mac machine
Any solutions....pls
Thanks

Keyboard not working when setting up new MacOS VM

invalid@example.com (XavierP2) — Mon, 01 Jul 2024 16:42:41 +0000

My host machine is an M1 MacBook Pro running MacOS Montery. I'm using Parallels 18. I am trying to set up a new MacOS VM but when I get to the initial steps where you have to type in your Apple ID etc, the keyboard doesn't work at all. I tried the MacBook Pro's built-in keyboard as well as a wireless Apple keyboard but none allow me to type during the setup.

Both keyboards work normally elsewhere. Anyone has experienced this with perhaps a fix/workaround?

TIA!

Printing by USB not working

invalid@example.com (BuckA1) — Mon, 01 Jul 2024 05:15:47 +0000

Hello I am using parallels 19 with sonoma OS. I have finally figured out how to print over wifi but all my printing needs are done without wifi and with a usb cord. I cannot get it to work at all even though my parallels is picking up the usb and even allowing me to print the print never actually gets executed on the printer. This is a major issue that I would like to figure out sooner rather than later.

Parallels Desktop 16 for Mac 스탠다드 에디션 설치파일 다운로드

invalid@example.com (김MD) — Tue, 25 Jun 2024 08:29:54 +0000

Parallels Desktop 16 for Mac 스탠다드 에디션 영구구매후 사용중이에요

상용중에 꺼짐 현상이 지속적으로 발생해서

재설치 하려합니다.

사이트에서 다운로드가 안됩니다.

Parallels Desktop 16 for Mac 스탠다드 에디션 다운로드 링크를 알려주세요

The installation package for version 16 cannot be found on the official website

invalid@example.com (sunshuang) — Tue, 25 Jun 2024 08:24:27 +0000

I purchased the activation code for version 16, but after updating the system on my computer, I couldn't find the corresponding installation package on the official website

Apple Thunderbolt to FireWire Adapter

invalid@example.com (sugus) — Wed, 19 Jun 2024 23:39:25 +0000

Hi Folks

I have:

MacBook Pro (Mid 2015)
- MacOS High Sierra (10.13.6)
- Parallels Desktop 17 for Mac, Standard Edition, Version 17.0.1 (51482)
- Windows 10
- Apple Thunderbolt 2 to FireWire (400)...

Apple Thunderbolt to FireWire Adapter

Parallels App Store Edition not upgradaing

invalid@example.com (NavkaryaC) — Mon, 17 Jun 2024 17:45:52 +0000

Tried factory resetting my Mac. Then, while reinstalling Parallels the Windows 11 Pro got installed. However, I am unable to upgrade because none of the payments are going through. (Ref. 469149666)

Memory Speed is 667Mhz,

invalid@example.com (herrywongP) — Sat, 15 Jun 2024 12:51:44 +0000

After I install parallel Desktop in Macbook with Intel CPU, the Memory speed is 2667Mhz, but it shows 667Mhz, and I have no way to fix it, how can I fix this? thanks.

coherence mode special short cut

invalid@example.com (AM_6) — Wed, 12 Jun 2024 11:11:21 +0000

Hello all,
Can't believe how long i've gone without Parallels, even thought about getting a PC just for a few apps... fortunately we dont have to do that anymore!
I have a question - coherence mode for single app was a big draw for me - i saw some reviews where people created special coherence mode shortcut icon in the dock - with the parallels icon in RED, as per below screenshot below.
Anyone know how to create this special coherence mode shortcut with the RED parallels icon please?...

coherence mode special short cut

How to use an external drive for Mac and Windows data storage

invalid@example.com (rexie) — Mon, 10 Jun 2024 06:21:08 +0000

I need help configuring my system.

I currently use a 2018 Mac Mini with 500GB SSD running Parallels. I am running out of storage space. I would like to use the Mac Mini SSD for the operating system (including Windows) and all software, and an external enclosure for all my data and backups etc. The Mini will act as a server.

I am unsure how the external drives should be configured. The Mac currently shows as APFS and any Windows NTFS. The 'sharing' option is set so that 'Mac volumes are...

How to use an external drive for Mac and Windows data storage