USB Devices Not Working in RC2

Apple Modem still does not work. Can get it to respond first time only but then get BSOD on an attempt to use it. Thereafter modem does not respond after reboot.

 

I've been having the same problem. I bought parallels to connect to my corporate network which requires a smartcard. I've been unable to get it to connect (latest build tested was 3186). I've also tried another brand of USB cardreader with simular problems.

 

Lexicon Alpha

USB device to plug instruments into computer.

MacBook Pro
2.33 Ghz intel core 2 duo
2 GB 667 DDR 2 RAM

Parallels build 1970 (october 31, 2006)

 

My Smartcard reader is a USB Omnikey CardMan 2020.
Can't get it work with none of the Parallels releases. (latest build tested was 3186).

The machine is:
MacBook Pro
2.0 Ghz Intel Core Duo
2GB 667 DDR2 Ram

 

Philips TSU7500 Not Working

Just to add my show-stopper:

Device: Philips TSU7500 Remote Control
MFR: Philips Consumer Electronics Company
OS: Windows XP SP2, latest patches
Symptom: XP installs driver just fine, gets the "USB Connected" chime, but Pronto Pro Edit software reports that the device is not supported. Works fine under Boot Camp.

This has been the same since I first started using Parallels months ago, and is still with me in the latest release.

 

Device: Canon DR-2080c Scanner
MFR: Canon
OS: Windows XP SP2
Symptom: Twain driver installed fine, device selected from USB menu, when trying to scan, I get the "No Device Found," even though it is plugged in and ready to go.
Affect: Cannot use scanner with my MacBook Pro inside Windows.

 

Motorolla Q

Hi I just got the Q and well it seems like all I have been told is to vist this website and that wensite but it would not worl with my mac . I have xp running with parallels on my macbook . Would I be able to active sync on parallels or is it still not allowing you to use the usb port. Seem like eveytime i connect it tells me another device is using the usb connection .

 

Unabel To Use My Epson R2400 Usb 2 Printer

 

USB device not responding

Please pass this one on as well:

Mac OS X.10.4.8
Processor : 1.5 GHz Core Solo Mac Mini
MANUFACTURER OF USB DEVICE: Brother PED- Basic USB card Writer Box & card
Brother PED software version: 1.07 for Windows XP

ERRORS: times out with long periods of no activity. "Not-responding" error when clicking on design within software
Parallels 3170 RC3

No activity even after trying to send error to report, nothing happens.

sewfuntoys

 

what do your own network administrators say?

Hugh W

 

X10 CM15A ActiveHome Pro

The ActiveHome software can't read the time from the device; when I try to download to it, it takes many minutes (versus a couple of seconds on a real Windows machine) and doesn't seem to actually affect the device (sometimes with error messages, sometimes without).

Build 3188.

 

I am also having problems printing to my R2400 usb. I'm using a 24" imac, Windows XP sp2, Build 3188. No response from parallels e-mail support.

 

Sansa Mp3 player, Windows will detect it but none of the programs it works with will detect it. So frustrating!

 

Sony Ericsson p910a can work with Parallels

I have build 3212, and I would like to inform everyone that after days of struggling with the syncing situation between my p910a Sony Ericsson phone and my MacBook, I have finally got them working together flawlessly. Here is what I did, if it helps:

Settings:
- Windows XP Pro with Service Pack 2 w/Installation of Bonjour -- I don't know if it matters, but it is supposed to help with USB communications
-Build 3212
-USB Enabled
-Autoconnect is off
-OS Window for viewing -- if it matters since the staff guy said it may

1. Originally installed all Sony apps, and nothing work at all.
2. Uninstalled all the Sony apps and started over.
3. I first started with downloading the phone dock driver from Sony website.
4. Plugged in the dock into a USB port and it detected new hardware (SEMC DSS SyncStation) once I manually selected it from the VM (Virtual Machine) USB list in the bottom right list of icons.
5. Pointed the Install Wizard to the correct folder (DSS folder) that contained the drivers.
6. The install wizard popped up again with another new hardware called, as well as my memory recalls, a USB Serial Port, so I pointed to the same DDS folder to install the other driver. Then it finished.
7. Then I downloaded and installed the Sony Ericsson PC Suite from the website.
8. Restarted the OS.
9. Then I made sure the USB device was checked in the VM icon on the bottom right part of parallels.
10. Then I double clicked on the sync icon (two opposite pointing arrows) in the Windows XP Tray and checked the USB connect.
11. Plugged in my phone and it worked.

I tried to remember everything for you guys out there. I hope it helps.

 

still not working

Just installed the latest as of December 6 2007 (v3.0 build 5580) and STILL does not work. It gets further than it did before, but erroneously reports that "The battery level of the connected device is too low to start download or upload." even when it's plugged into the AC adapter.

Folks: VMWare works PERFECTLY, i suggest you use that. Parallels guys: we need this, so we are forced to use your competitor's product??

 

Another broken USB device... *sigh*

MSP430 USB-Debug-Interface. It's a JTAG debugger. Sadly our client is using it so I have to use it as well. When I plug it in to Parallels (either with automatic or from the USB menu) it crashes the machine hard (kernel crash). Brings the whole Mac down and requires a hard power-off and restart.

Anyone have any clue what's wrong or a work-around?

 

Logitech Extreme 3D Pro

Device: Logitech Extreme 3D Pro
Parallels: build 5582
Guest OS: Windows 2000

This device cannot start. (Code 10)

Device works fine in Windows XP with the latest driver, however.

 

Device: GPSMap296
MFR: Garmin
OS: Windows XP SP2
Symptom: "Device in use by another application.."
Affects: Unable to communicate with device although system recognises presence.
Changes : Problem arose when OS X upgraded to 10.4.10. Subsequent upgrade to 10.4.1 and PB 5160 has made no difference.

 

I guess someone has just conveniently forgotten about this problem?

 

Obviously still talking to myself.